Print Page | Close Window

Copyright© 2019 Sol-Gel Gateway


Current collection

Printed From: Sol-Gel Gateway
Category: Sol-Gel Forum
Forum Name: Applications and Uses
Forum Discription: Discussion on existing and potential applications and use of Sol-Gel derived materials
URL: http://www.solgel.com/sgforum/forum_posts.asp?TID=1731
Printed Date: 21 September 2019 at 11:37am


Topic: Current collection
Posted By: hana
Subject: Current collection
Date Posted: 25 July 2008 at 11:39am
Hello all..,Big%20smile

im thinking about outdoor application of DSSC... many ideas in my mind, sure i will try them till get a satisfied results, BUT... i need to share something with you..
now i got a not bad current output on the laboratory scale, need to increase this current by this way..
firstly,applying a good metal , so that it can collect all the electrons produced in the cell ( the actual current).. don't know yet whats the metal that can be adhesived on the conductive glass without any possible corrosion by the electrolyte (using sealant) and same time not expensive.
may b Al or Cu with good sealant is good??Confused


 



Print Page | Close Window